Ignition Switch Connection Woes

[Gareth]

I'm building a seven type car and using a Mitsubishi Galant steering column with light stalk and ignition switch. Lights indicators are all sorted but the ignition has me scratching my head. In the picture obviously wires 3 and 4 are the feeds (both black with silver band). So 5 will be sidelights but then headlight 2 does not connect to 5 and headlight off flash connects to side light. Sorry but it has me flummoxed, so much so I have rechecked them all 3 more times, all the same result. I feel there is going to be an obvious answer would be great to understand this Thanks in advance.

 

[Squid]

What kit are you using to build the 7 rep as it may be an idea to get on to there forum, also if you are using a Mitsi G steering column then you need to get the wiring diagram for that car form a Mitsi site and tie them both together.

Good luck as I am after this,

 

[Gareth]

That looks pretty nice. No kit, I am doing a scratch built Hyundai 1.6 turbo power. Ive tried to find a Galant diagram but no joy on that Thanks

 

[Gareth]

Sorry I reread this question later, and duh. I'll blame something too much alcohol or not enough. The ignition and indicators are all sweet it is the headlight switch that does not make sense. Have tried to find a diagram for this but no luck.

 

[Gareth]

Sorry I reread this question later, and duh. I'll blame something too much alcohol or not enough. The ignition and indicators are all sweet it is the headlight switch that does not make sense. Have tried to find a diagram for this but no luck.

 

[Squid]

Headlight switch will usually go via a relay.