Discuss IP67 Push Switch to replace plastic outdoor light switch and bell in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
0
Hi Guys,
Please can I have some advice on IP67 switches. I would like to use outside to replace bulky plastic switch boxes available on the market. One will be used for a light switch and another for a door bell. I plan to use a stainless steel push switch mounted on the face of a small sealed junction box recessed in the wall with a metal plate as a cover only.
I am really struggling to find the appropriate switches that are Latching 220-250v where the Led is also mains powered not 12V and the over switch momentary that is also 220-250v.

Please can someone help me.

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-10-54 - EletriciansForums.net
IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-7-57 - EletriciansForums.net

Regards
Dean

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-5-42 - EletriciansForums.net

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-6-23 - EletriciansForums.net

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-7-22 - EletriciansForums.net

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-8-15 - EletriciansForums.net

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-9-45 - EletriciansForums.net

IP67 Push Switch to replace plastic outdoor light switch and bell upload_2019-3-6_8-10-27 - EletriciansForums.net
 
The switches are is IP67 which can be immersed in water so no enclosure is required. I can see the switches online but I need to know exactly which ones to order as there are many different types.

If they are to have mains voltage connected to them, they MUST be in an enclosure of some kind, this is non-negotiable.

The wiring regulations state that the basic insulation must not be visible outside an enclosure. Basic insulation is the initial layer of insulation around the conductor, which will have to be visible at the point of termination.

I would suggest, as you've stated you're not a spark, that you engage the services of a local electrician (preferably one that comes recommended from family/friends/colleagues).
 
As my first thread, the connector will be installed in an IP rated junction box, the only part of the switch open to the elements will be the front face.
I have come onto this forum looking for advice on choosing the correct switch.
 
Hi Dean - interesting question is - when you drill a hole in your IP rated box to fit your IP rated switch what is the resulting IP rating? You have taken the role of manufacturer :) .
 
If you look at most junction boxes, you have to put a hole in for cables.
What is the difference. I am confident I can drill the box and seal around the hole. If necessary I will fill the whole box with IP68 magic gel! Can anyone help with choosing the right switches please?
 
You just need a 240v, SPST, normally open, latching switch for the light and a 240v SPST normally open non-latching switch for the bell.

Code:
https://uk.farnell.com/alcoswitch-te-connectivity/av2511ea12t5q04/vandal-resistant-sw-spst-3a-250vac/dp/2851873
This is a 25mm latching switch that comes with leads

https://uk.farnell.com/alcoswitch-te-connectivity/av2510ea12t5q04/vandal-resistant-sw-spst-3a-250vac/dp/2781544
This is a 25mm non-latching switch also with leads.
 

Reply to IP67 Push Switch to replace plastic outdoor light switch and bell in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock