S
Spudnik
J.I.B. Grading Definitions - Approved Electrician Grade
Qualifications and Training
Must satisfy the following four conditions:
1) Must have been a registered apprentice or undergone some equivalent method of training and have had practical training in electrical installation work.
2) Must have obtained an NVQ Level 3 in electrical installation work (or approved equivalent) - see Note 1
3) Must have had two years experience as an Electrician subsequent to the satisfactory completion of training and immediately prior to the application for this grade.
4) Must have demonstrated competence and obtained a suitable qualification (the City & Guilds 2391 is a suitable qualification) in the inspection, testing and commissioning of installations - see Note 2.
Note 1:
If the applicant meets the other other three criteria but has not achieved an NVQ Level 3 in electrical installation, then a "Provisional" grading may be awarded if the following criteria are both satisfied:
a) have obtained at least the City & Guilds 2360 Electrical Installation Theory Part 2 Course Certificate (or approved equivalent).
b) have obtained Achievement Measurement 2 or must be able, with the application for Grading and any other relevant supporting evidence (i.e. the City & Guilds Electricians Certificate) which may be required, to satisfy the Grading Committee of his experience and suitability.
Note 2:
The employer will ensure that the cost of a first attempt at the training scheme and examination for inspection, testing and commissioning is met without cost to the operative when they have satisfied all the other requirements for grading/regrading as an Approved Electrician.
Duties
Approved Electricians must possess particular practical, productive and electrical engineering skills with adequate technical supervisory knowledge so as to be able to work on their own proficiently and carry out electrical installation work without immediate supervision in the most efficient and economical manner; be able to set out jobs from drawings and specifications and requisition the necessary installation materials; be able to accept responsibility for the proper completion of jobs and, if required, supervise other operatives. They must also have a thorough working knowledge of the National Working Rules for the Electrical Contracting Industry, of the current IEE Regulations for Electrical Installations, of the Electricity Supply Regulations 1988, issued by the Electricity Commissioners so far as they deal with Consumers' Installations (ie Regulations 22-29 inclusive and 31), of any Regulations dealing with Consumers' Installations which, may be issued, relevant British Standards and Codes of Practice, and of the Construction Industry Safety Regulations.
