Discuss Kitchen Grid Cpc’s in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
1
Hi guys, It could just be me being daft here but I’ll ask the question anyway!
I don’t use multi gang grid switches too often but I have two to fit currently. Both have a mixture of ring main and a few appliance radials.
Would you earth the yoke with the cpc from one circuit and keep all the other cpc’s paired up but separate or would you combine all cpc’s together...ring included? I’m just thinking doing the latter might affect individual circuit r1+R2 readings?
Any thoughts appreciated!
 
Hi guys, It could just be me being daft here but I’ll ask the question anyway!
I don’t use multi gang grid switches too often but I have two to fit currently. Both have a mixture of ring main and a few appliance radials.
Would you earth the yoke with the cpc from one circuit and keep all the other cpc’s paired up but separate or would you combine all cpc’s together...ring included? I’m just thinking doing the latter might affect individual circuit r1+R2 readings?
Any thoughts appreciated!
Personally I would connect all cpcs together. This will reduce the impedance and the touch voltage. Parallel Earth paths are often unavoidable anyway and are desirable, although you may need to verify each one separately. Hence "during erection and on completion".
 
If that is the only common point for CPCs outside of the CU, then if you disconnect both ring ends at the CU to do the RFC loop test it won't make a difference.

Depending on the number of CPCs though you might find it impractical to tie all together, so maybe choose the highest current one as the box earth so at least you know for sure it meets the adiabatic limit in the event of a fault.
 
Thanks for the thoughts guys. There aren’t masses of them so I think I’ll opt for jointing them all at that point and placing a flying lead on the yoke....post testing of the appliance radials & ring.
Input appreciated :)
 
Last edited:

Reply to Kitchen Grid Cpc’s in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock