- Reaction score
- 8,197
Loads of commercial/ industrial lighting is wired in 2.5 on a 16a radialI bet many would code a 16A MCB on domestic lighting C3 or 2 though its allowed ,subject to installation method.
S
Discuss Klik plug and sockets in the UK Electrical Forum area at ElectriciansForums.net
Loads of commercial/ industrial lighting is wired in 2.5 on a 16a radialI bet many would code a 16A MCB on domestic lighting C3 or 2 though its allowed ,subject to installation method.
S
Correct me here if I, m wrong but I believe the regs allow pendants to be wired in 0.5mm.I,ve noticed a growing number of manufacturers taking advantage of this. I recently I stalled a 100 watt globe (Robus) that had a lead attached that was 0.5mm MAXThere is a regulation mentioning 0.75mm flex being suitable for connecting lights to lighting circuits with circuit protection rated above the CCC of the
? . 0.5mm min is allowed for pendants here(though never seen in practice). As, mentioned in my previous comment though, it's, certainly applied by some lighting manufacturers0.5mm is allowed for signal and control cables.
The exception would be within a specific appliance,
Reply to Klik plug and sockets in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.