Test Meter - Forum Sponsors since 2007!
This official sponsor may provide discounts for members

Discuss Lewden chandelier in the Lighting Forum area at ElectriciansForums.net

richy3333

-
Mentor
Arms
Supporter
Esteemed
Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Can anyone tell me what the fittings are for this. I assume Some sort of proprietary Lewden lighting system? Its a mini chandelier and a cover slides on to this. Spade connectors do not fit the lugs. A customer has asked me to wire it up for them (they had it removed from another house and dont know how it was fitted).

Many thanks.IMG_0713.jpeg
 
Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members
Come in 2 parts , the base that you wire up and screwed to the ceiling and the bit with pins and the hock you attach to the base.
Used for heavy chandeliers so the cleaner could take down to clean the crystal
 

richy3333

-
Mentor
Arms
Supporter
Esteemed
  • Thread Starter Thread Starter
  • #4
@Dustydazzler I have the base and fancy light part. So is there something I can access in the base to wire into? (I only saw it briefly).

Thanks for the help
 
@Dustydazzler I have the base and fancy light part. So is there something I can access in the base to wire into? (I only saw it briefly).

Thanks for the help
See link in DT1991 post above , if you have both parts then it will become very clear how to use it...
Another similar link
 

Reply to Lewden chandelier in the Lighting Forum area at ElectriciansForums.net

Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members
Top Bottom