Onemikekelly
DIY
- Reaction score
- 0
I need to add a chocolate block to a light switch for an earth, what amp should I use please
- Thread starter Onemikekelly
- Start date
-
- Tags
- fitting light light switch switch
Discuss Light Switch Fitting in the DIY Electrical Advice area at ElectriciansForums.net
- Reaction score
- 16,955
Standard size 5A. Or whatever size is needed to get all the wires in properly.
Reply to Light Switch Fitting in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi,
I have a single light switch, wired like this.. the 2 wires in com, with a always live wire coming to the switch, and then wire going out to...
I have a single wall switch powering 1 light and I want to add a separate light and change to wall switch to a double to power them both...
Hi
I want to add a light to my attic.
There is a single switch on the landing that I want to change to a double switch and then use it to still...
I have a strip light in the kitchen operated from a single switch. I want to replace it with a straight bar 4 spot array. There are three supply...
I own two flats with a small common lobby. Although operable from both flats, the common lobby light appears to be wired to flat A's circuit...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.