Discuss Lutron testing in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

S

sparks1653

Hi,

i have installed a Lutron Graphic eye 3000 series lighting system on a new build project. it has come to testing and certifying the property. i was wandering how the best way to produce the certificates is? does the Lutron controller need a certificate of its own, or do i just test all the circuits supplied from it to make sure they are safe and correct but only write the certificate for the main board and include readings for the lutron control units?

cheers,

Jess
 
The Graphic Eye is essentially a fancy (but very nice) light switch, treat it as a dimmer - ie disconnect it completely from the circuit, and connect the circuits through with connector strip.

admittedly there will be a few more legs to the circuit than on a normally dimmed circuit, but I usually record the worst case/highest value.
 

Reply to Lutron testing in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock