Discuss Moving from Installation to Maintenance in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Thanks for all the replies. I want to be doing fault finding, problem solving etc. Not just changing lamps and broken sockets. I’m finding that on the install side I’ve lost interest. Mainly because it’s not about doing a good job anymore, it’s all about throwing it in. I’m very conscientious and like everything to be spot on. Having to throw it in to save time is not my cup of tea. But it is beginning to be the same whoever I work for. I’ve lost that fire in my stomach for it. I feel a different direction will re light that fire. I also have a family and I’m just not prepared to travel all over the country anymore. Currently I don’t work for a bad firm, although the work is not testing me and boring and I’m always local so I have plenty of time to find the right position. I will not be rushing into it and taking the first thing that comes along.
 
Hi Gary,
I did 12 years in the RAF as an electrical and electronic technician, left in 2015 and worked as a contractor for a flower automation company where it was a steep learning curve in comparison to what I did in the military! I then moved into the food industry as a multi skilled engineer and I love it. The money's good, hours are steady and it's always different! You obviously get the repetitive stuff but that's mixed in with frantic fault finding! You get some real head scratchers and spend some time buried in wiring diagrams...if you have access to some! Otherwise it's following cables!
I say do it! Start with a smaller company, learn the controls side of things and move after your learning curve steadies out.
Good luck mate!
 
@Pete999 @rapparee doesn't mean to be disrespectful , he is not that kind of lad . It is like us saying " what can possibly go wrong.....
Appreciate that comment ruston thanks, I never meant to assume anything, maybe my post was misinterpreted, never meant to put the OP down, if it did seem that way the apologies to the OP, what I meant was, it seems that moving from installation is not as hard as it seems, IF i could do it then most other guys will have no problem adapting, personally I wish the OP well if he gets the new job.
 
I will be doing it. Made my mind up now. My mate who has just done it is on 10k a year more than I am. That alone is enough incentive to do it. He comes from my back ground but has had some experience of quarries. Conveyers and motors etc. I know I’m more than capable of learning what I need to know.
 
I’ve been a maintenance electrician for 24 years now (in the RAF until last year funnily enough). As has been said the pressure really comes on when something’s down. I work on wind turbine lifts now and the pressure to get it fixed when it’s down can be quite high. Nobody reports the little problems that are the indicators of something bigger happening because they don’t want to lose the equipment. That means when it does break it’s always a huge drama for the users. I enjoy the fault finding but I miss having another electrician to bounce ideas off like I had in the RAF. That can increase the pressure for some reason.
Your new employer will know your background and cant expect you to 'hit the ground running'! they will need to at least provide some basic training in the areas/machines you are expected to be working in and if it is a big company there will be others there to help!
I will be doing it. Made my mind up now. My mate who has just done it is on 10k a year more than I am. That alone is enough incentive to do it. He comes from my back ground but has had some experience of quarries. Conveyers and motors etc. I know I’m more than capable of learning what I need to know.
In my opinion you don’t have to worry about the motors as much as the control side. If you’ve voltage to your motor and it’s not turning it’s kaput, that’s as complicated as it gets. If you’ve no voltage then you’ve a whole circuit diagram of control circuits that are preventing it. As long as you’re confident in your fault finding you’ll be good. As someone else has already said your employer will have to give some sort of training on how the equipment works to give you that base knowledge anyway.
 
Go for it !
Loads to learn, and a different challenge most days....
Whats not to like, oh and lots of coffee to consume...
 

Reply to Moving from Installation to Maintenance in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock