Advertisement - Content continues below
Advertisement - Content continues below

Discuss Multifunction Energy Meter Help in the Commercial Electrical Advice area at ElectriciansForums.net

O

ocbark

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

First of all sorry if this is in the wrong place. I am a buyer for an engineering company and have been tasked with the following:

I am looking for a descent Multifunction energy meter that supports the Modbus protocol and measures Kwh. The two likely contenders i have found so far seem to be the:

Diris A20 - Diris A20 Multifunction Electricity Meter
Nemo 72-L - Nemo 72-L - Modbus
Has anybody got any experience with either of two meters? Does anybody know any alternatives?

I have also been reccomended the Diris A40 but i think that does more than i need (it supports harminocs etc which i am not required to log)

Any help on this would be much appretiated. Essentially the spec i have been given is to find an energy meter capable of measuring 3 phase KwH and kVARh and must be compatible with the Modbus protocol

Thanks in advance

ocbark
 
Advertisement - Content continues below

Reply to Multifunction Energy Meter Help in the Commercial Electrical Advice area at ElectriciansForums.net

Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members
Advertisement - Content continues below
Top Bottom