robmcconnell
DIY
- Reaction score
- 0
Hi All
Thanks for your help in advance. I am working on a project to wire a number of low voltage charging units on one circuit.
The power will be supplied will be 20amp mains power through 2.5mm cable, each charger is 42V and I wanted to wire them about 2 foot apart. My question is how do I do this safely and ensure the voltage does not drop at the end of the line.
Cheers
Rob
Thanks for your help in advance. I am working on a project to wire a number of low voltage charging units on one circuit.
The power will be supplied will be 20amp mains power through 2.5mm cable, each charger is 42V and I wanted to wire them about 2 foot apart. My question is how do I do this safely and ensure the voltage does not drop at the end of the line.
Cheers
Rob