Discuss New Member, Looking for professional help regarding GN3 and On-site guide. in the The Welcome Forum area at ElectriciansForums.net

Reaction score
1
Good Morning all,

I am a new member, initially drawn to the forums by the technical help given by you guys and any potential help I may be able to offer.

I am currently doing my AM2, (After 8 years in the industry) As I believe that I need all my papers up to date for the way the industry is going. I am currently working as an electrical site manager and have been revising during the day for the exam at the end of the AM2 (C&G 2382) I believe ?

Getting to the point I cannot seem to reference the regulation numbers from the onsite guide & GN3 to any other document I.e. BS7671. For example

Page 74 of the onsite guide shows (522.6.102) 'In domestic or similar installations....' Where can I reference this number to as (Part 5, Chapter 2, Section 2, reg 6 of BS7671) does not relate to that of the on site guide...

I bet im being stupid but I cant see it for the life of me... Many thanks if your still with me.
 
if i recall, 522.6.102 refers to cables buried in walls < 50mm deep.
 
If you're looking at the 17th versions of the guides they may be older ones with errors - the digital regs has the latest edition of the Brown book and OSG only for me to check.

They both reference 522.6.202, which is the one regarding cabling <50mm

But that's not on Page 74 of the OSG, but on page 34 in the 7th edition (17th edition AMD3) .

Are these printed guides, or PDF versions? Might be a dodgy version with poor OCR?
 
If you're looking at the 17th versions of the guides they may be older ones with errors - the digital regs has the latest edition of the Brown book and OSG only for me to check.

They both reference 522.6.202, which is the one regarding cabling <50mm

But that's not on Page 74 of the OSG, but on page 34 in the 7th edition (17th edition AMD3) .

Are these printed guides, or PDF versions? Might be a dodgy version with poor OCR?

He's not been on here for 2 years.
 

Reply to New Member, Looking for professional help regarding GN3 and On-site guide. in the The Welcome Forum area at ElectriciansForums.net

Similar Threads

Hi everyone, I'm currently working towards getting qualified as an electrician and am hoping to get my foot in the door with an apprenticeship or...
Replies
0
Views
871
Completed my AM2s start of this year. My whole career plan is to run my own company/sole trader. Be my own boss basically. I always get asked...
Replies
14
Views
644
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
Replies
7
Views
2K
I installed outdoor lighting and outlets. I finished this past year. I passed my inspection on April 2022. I was so pleased, BUT now the circuit...
Replies
3
Views
897
Hi. I have just joined the forum. I have lived in Brazil since 1975. I am not a professional electrician but have had 35 years experience of...
Replies
5
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock