B
bigbro
Hi all, advice please....
I have fitted an outside sensor light.( Domestic.) it is less than one meter to the consumer unit. i have used 1.5 twin plus e from the back of the light connected to a five amp fused switched spur socket with a neon indicator then 1.5 again direct into the consumer unit on its own 6 amp mcb. i have connected it to the non rcd side and the rcd side ensuring that the neutral is connected to the correct neutral side.... but it still trips the rcd.
Any advice please.
Thanks
Brendan
I have fitted an outside sensor light.( Domestic.) it is less than one meter to the consumer unit. i have used 1.5 twin plus e from the back of the light connected to a five amp fused switched spur socket with a neon indicator then 1.5 again direct into the consumer unit on its own 6 amp mcb. i have connected it to the non rcd side and the rcd side ensuring that the neutral is connected to the correct neutral side.... but it still trips the rcd.
Any advice please.
Thanks
Brendan