Discuss Pir help required in the Lighting Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi, I have limited electrical knowledge but do have some qualifications through being a refrigeration engineer. In my hall/passage I have a light switch at either end. I have replaced one of them with a danlers wapir occupancy switch. It's working but won't go out completely on the timer, it only dims as if it is still receiving voltage from somewhere.
Any help would be great.
Many thanks
Gary
 
Aico 3000 Range
This official sponsor may provide discounts for members

telectrix

-
Mentor
Arms
Esteemed
probably induced voltage from the 2 way strappers.
 
  • Thread Starter Thread Starter
  • #3
Hi Pete, thanks for your kind reply.
I'm not sure I understand, please could you elaborate and is there anyway round it?

Gary
 
uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members

Reply to Pir help required in the Lighting Forum area at ElectriciansForums.net

CK Tools :) The professionals choice when it comes to Electrical Tools
This official sponsor may provide discounts for members
Top Bottom