Advertisement - Content continues below
Advertisement - Content continues below

Discuss plastic throughout the building in the Industrial Electrician Talk area at ElectriciansForums.net

V

vectraj

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

so i have plastic pipework through the whole house (domestic) even coming right out the consumer side of the stop tap,the only thing that isnt plastic is the 22mm gas main which is earthed 10mm. now am i right in thinking all i have to x bond is @ the boiler...? ie gas-flow-cold-hot-return. i have earthed the supply side of the water main 10mm which was in 15mm copper. what about the metal sink in the kitchen?:confused:
 
Test Meter - Forum Sponsors since 2007!
This official sponsor may provide discounts for members
Advertisement - Content continues below
A

assured elec

  • Thread Starter Thread Starter
  • #2
Just earth the Gas , and cross bond the boiler .... Thats all you need to do ...

leave the kitchen sink as is
 
Advertisement - Content continues below

Reply to plastic throughout the building in the Industrial Electrician Talk area at ElectriciansForums.net

uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
Advertisement - Content continues below
Top Bottom