- Reaction score
- 2
hi folks just seeking clarification, am i right that rcd protection is not required, for example 16amp commando socket for roller door or a 3phase commando socket for a compressor? all cabling is run on the surface
- Thread starter marksparky
- Start date
Discuss rcd protection? in the Australia area at ElectriciansForums.net
Reply to rcd protection? in the Australia area at ElectriciansForums.net
Similar Threads
Hi all,
Just a quick one regarding the need for RCD protection for socket outlets rated up to and including 32A.
I have been tasked to install...
Hi all,
New to the forum.
I have been asked to look at this for one of our guys who's had an issue onsite after some electrical works had been...
hi all
come across a new build commercial office where radial circuits feeding electrak power track was protected by 32A RCBO at dist board and...
Hi everyone,
I have been asked to pull in some new 3 phase supplies for 7 new welders which do not require a neutral connection.
The client has...
I'm obviously still new and learning about what I can and cannot do, but essentially I want to install an EVSE at my own house for an electric...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.