Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Discuss Reg number for glanding SWA in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi!

Carried out an EICR and found the SWA supply to the garage wasn't glanded at either end. Can someone tell me what regs number it is that states it should be?

Thanks
Post automatically merged:

Ok so after looking further I may have answered my own question! I would say this comes under 526.1? Correct me if i'm wrong.

(P.S Its a 3 core SWA using one of the cores as the cpc)
 
Last edited:
Advertisement - Content continues below

telectrix

-
Mentor
Arms
Esteemed
even with a core as cpc, the steel wire armout must be earthed, even if just at 1 end. not sure what the reg. is.
 

davesparks

-
Mentor
Arms
Esteemed
Proper materials and good workmanship should cover this one.
Installing as per manufacturers instructions.
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to Reg number for glanding SWA in the Electrical Forum area at ElectriciansForums.net

Aico 3000 Range
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Advertisement - Content continues below
Top Bottom