Discuss relay question in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Share this page
E
Edd
As above,, theres No way they would make a relay raited at 14ma for the contacts (unless it was tin foil) so this is no doupt the coil raiting. unusual to see the current raiting of the coil on it though...
K
Knobhead
This is the data sheet for a Schrack plug in relay
http://documents.tycoelectronics.co...ction=srchrtrv&DocNm=MT&DocType=DS&DocLang=EN
It gives the coil rating for various voltages.
PS Schrack are some of the best I've used.
http://documents.tycoelectronics.co...ction=srchrtrv&DocNm=MT&DocType=DS&DocLang=EN
It gives the coil rating for various voltages.
PS Schrack are some of the best I've used.
Reply to relay question in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Share this page
Similar Threads
Background
I live in Indonesia, the voltage for residential buildings ranges from 220 V to 230 V, I need help with the installation of the...
Hi there
I have a few questions related to the power ratings of certain devices and how this interplays with the fuse. The reason I am asking...
Hi everyone
Ive just had an electrical condition report conducted on a mixed-use property, and I am extremely surprised that after the last report...
I hope this is the right place to post this, please redirect me if not. I've spent quite some time reading the forums, so I apologize if I've...
I have a 230 Volt single-phase circuit with a 100 Amp cutout fuse and a 100 Amp MCB switch, so the supply is rated at 23 kVA.
Only about 13% of...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.