Discuss Replacement in the Lighting Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
0
Hi guys ,looking to replace a anchorn AET-635CT1 transformer in my light to a compatible LED driver ? It’s a round transformer with a hole .Any advice would be appreciated.
Cheers
John
 
TL;DR
Replacement?

Attachments

  • Replacement 400752A2-7EBA-4387-A6E6-969B1596C9D1 - EletriciansForums.net
    400752A2-7EBA-4387-A6E6-969B1596C9D1.jpeg
    452.5 KB · Views: 6
What kind of bulbs does your fitting take, and can you get LED as replacements?

you might just have to get a small rectangular transformer/driver and have it tucked into the side a bit. Not sure you can get a driver that exact shape, but you could try the manufacturer?
 
Did something similar, used I think they were Aurora round LED Drivers. Others are sure to make them too or as previously said a small rectangular one will probably fit!
 

Reply to Replacement in the Lighting Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock