B
Billybalata
Hi.........i(foolishly)turned my 9448+ alarm off at the mains about 2 years ago because the cat kept tripping it when it was set.
Now the cat sadly is no more(R.I.P),but on resetting the circuit breaker all is dead........a quick look in the circuit box and i find a large battery cell which i suspect is dead.
Curiously enough the circuit box is marked 9448+.........whilst the separate control panel is marked 9427..........i estimate the alarm to be 7 years old(when the house was built)
I have no manual for this alarm and no test equipment..........i was an avionics techie in the RAF 20 years ago,and whilst competent not to blow myself up i am hardly current.
My questions are
1:is it likely to be a dead battery?
2:if so will i need engineers codes when i replace the battery?
3;if so does anybody no the codes and sequences?
Many thanks in advance Bill
Now the cat sadly is no more(R.I.P),but on resetting the circuit breaker all is dead........a quick look in the circuit box and i find a large battery cell which i suspect is dead.
Curiously enough the circuit box is marked 9448+.........whilst the separate control panel is marked 9427..........i estimate the alarm to be 7 years old(when the house was built)
I have no manual for this alarm and no test equipment..........i was an avionics techie in the RAF 20 years ago,and whilst competent not to blow myself up i am hardly current.
My questions are
1:is it likely to be a dead battery?
2:if so will i need engineers codes when i replace the battery?
3;if so does anybody no the codes and sequences?
Many thanks in advance Bill