Discuss service interval timer help! in the Central Heating Systems area at ElectriciansForums.net

Reaction score
16
Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

I got a virtually new Danfoss programmer out of a job that was having a new boiler and controls installed. I fitted it in my house as my programmer was not working. It now appears that the service interval timer had been set previously and the programmer has now disabled my boiler. Danfoss won't tell me how to reset it as I'm not gas safe. Does anyone out there know what I need to do? Thanks in advance!
 

Sintra

Staff member
Admin
Esteemed
Supporter
Reaction score
5,311
That's normall only a soft reset. A full reset normally requires a couple of buttons to be held in while pressing the reset itself.
 

UNG

-
Mentor
Esteemed
Arms
Reaction score
3,729
Doing a search it seems Danfoss have got this tied down I think you need to find a friendly gas operative or randomly try different button combinations until you crack the code
 

bigsteven

DIY
Reaction score
1
No probs.
thank you so much, this was handy after rining donfuss " doofuss" and they refused to help i own the unit and its nothing to do with gas but they would not help while i was locked down on covid.
but your instructions worked great thank you.
i had service april 2019 so it was due 2020 control panel locked out so i had british gas service check it for contract they took over but did not change clock on unit for service so now it was locked out 15 hot and heat and beeping.
but the new service date is now october.
so with your help i turned it off! fingers crossed,,
thank you.....
not buying doofuss again.
 

Reply to service interval timer help! in the Central Heating Systems area at ElectriciansForums.net

Similar Threads

Hi I recently bought my property from my (now former) landlord. In the past, my former landlord instructed gas engineers to set a service...
Replies
1
Views
805
Re: Danfoss FP715Si Programmer Anyone have any direct experience with this unit? NB: There are quite a lot of posts online about this issue, but...
Replies
3
Views
232
Wired all the usual for a boiler a while back, room stat in lobby & programmer in kitchen. Was an old boiler which has now packed in. They’re...
Replies
0
Views
237
Hi I’m not long registered and want to send thanks in advance for any advice which can be offered. A quick bit about me…..I qualified as a sparky...
Replies
0
Views
171
Hi All, Hope all had a good new year. I’m having a real issue fitting my hive system in my house I’m hoping someone can figure this out for me as...
Replies
15
Views
618

New Posts (Please Reply)

Top