Discuss Small toilet and sink in fuse board cupboard ? in the Industrial Electricians' Talk area at ElectriciansForums.net

S

stevie h

thoughts on this job .........

Got a job , its a very small cupboard under stairs , that is getting converted into the worlds smallest toilet , problem is that the fuse board(none RCD), main fuse and meter is all about 1 ft above were the new sink is going :eek: , the board is going to be boxed in .. the job don't involve moving the board but has me concerned , all the builder wants is a light , which will be no more than 4 ft from the sink , and an extractor fan , again 2- 3 ft max from the sink ..

what are you lads thoughts on the board , will put the fan and light on RDC protected spur .

Cheers

Ste
 
How are they going to fix the basin to the wall below the CU without drilling through a cable?

How far away from the door is the CU? You could always run a supply from the CU to a switch outside installed in steel conduit and then switch-wire and neutral back into the cupboard. Connect that into an LV transformer for a low-voltage light, and into a transformer with timer for a low-voltage fan.
 
thoughts on this job .........

Got a job , its a very small cupboard under stairs , that is getting converted into the worlds smallest toilet , problem is that the fuse board(none RCD), main fuse and meter is all about 1 ft above were the new sink is going :eek: , the board is going to be boxed in .. the job don't involve moving the board but has me concerned , all the builder wants is a light , which will be no more than 4 ft from the sink , and an extractor fan , again 2- 3 ft max from the sink ..

what are you lads thoughts on the board , will put the fan and light on RDC protected spur .

Cheers

Ste

May this not be classified as a special location thus LABC need to be notified?

They will take one look and say no way Jose can you have that.
 
i wouldnt go near it!

all you need is a little kid with wet hands picking about and your dun for!

and this might sound like an overkill but what if something needs isolating in an emergency and someone is taking a dump with the door locked???!!
 

Reply to Small toilet and sink in fuse board cupboard ? in the Industrial Electricians' Talk area at ElectriciansForums.net

Similar Threads

Hi, I have a client with a small caravan site, approx 5 hookups. His old toilet block was nothing much more than an old shed. He's now 'upgraded'...
Replies
2
Views
532
  • Locked
  • Sticky
Beware a little long. I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Replies
55
Views
5K
Hi all, First post here, hope I'm compliant with the rules! I did do a quick search before asking this, but I couldn't quite come up with the...
Replies
3
Views
3K
  • Locked
We have a garage attached to the property and are having it converted to an office with a small toilet. Electrics will include, internal lights...
Replies
35
Views
5K
Hi First time with this kind of a job for me. I have a scenario where i am planning to install about 50m 25mm TPN from a TNCS supply to supply a...
Replies
32
Views
6K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock