Discuss Smart light switch showing voltage when off in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi - went to a client tonight to wire a two way lightwave smart master and slave switch. When connected as stated on instructions the light was permanently on and when the switch was actually pressed on the bulb flickered. When I checked voltage across the live and switch live terminals it showed as 50v when switch was off - any ideas what could be the issue? Thanks all
 
  • Thread Starter Thread Starter
  • #3
You must be logged in to see the message.
 
  • Thread Starter Thread Starter
  • #5
You must be logged in to see the message.
 
SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members

Reply to Smart light switch showing voltage when off in the Electrical Forum area at ElectriciansForums.net

Top Bottom