So this week Trunking

[malcolmsanford]

So a couple of months ago we had this .................



To end up with this.................... The panel is not as nice as I would have liked. It is not to any British Standard and both the Earth and Neutral bars were solid pieces of copper, which our lads were going to drill and attach 4-6 bunched cables to via crimps......errrrrr no. So had to modify it and fit the bars as best we could. Not too shabby but next time I'll be ordering the panel. Notice apart from the colours, the phases are reversed. That is how it is done here, took me ages to get use to it




I know Florescent, but that was the clients choice. Lux levels over 250 at F.F.L. so I'm happy

 

[telectrix]

nice job, mate.

 

[Darkwood]

Nice to see pride in the detail ...good install

 

[cobrauk]

Whats lights you using there ? and are they hanging on conduit ? been along time since I have seen that done

 

[malcolmsanford]

They are 35 watt T5 twin 5fts.

Yes suspended from conduit drops. I was going to chain them but at that height I didn't want in future guys maintaining them ie changing lamps to also have the added issue of the fitting swaying about. Suspending them on drops makes them a little more rigid

 

[snowhead]

It's going to need more than Black and Yellow lines to stop the pallet trucks running into the panel..

 

[cobrauk]

We use Gripples so when the fork lifts hit them they swing away lol + they very fast to install that way