Solar edge

[powervan]

Lads who stocks them please

 

[BruceB]

segen does

 

[dansk]

CAS do also

 

[powervan]

do u need solar edge invertas or can u get away with any make ?

 

[powervan]

do u need solar edge invertas or can u get away with any make ?

IF using solar edge optimisers????????????????????????????????????????????

 

[dansk]

there is a plugin you can buy to enable to use any inverter with SE optimisers - but just use the system as a whole its great.

 

[powervan]

do i need ethernet link or wirless ?

 

[dansk]

i use Ethernet link, its cheaper as zigbee is £200

 

[SolarCity]

I believe Carbomat stock them also. Heard some good things about them so it's worth giving them a call.

 

[powervan]

cheers one more question no mc4 optimisers in country! would u see any probs with using mc3 to mc4 conversion leads (except cost

 

[dansk]

Powervan is it your first one?

 

[powervan]

cheers one more question no mc4 optimisers in country! would u see any probs with using mc3 to mc4 conversion leads (except cost

IE they have plenty of mc 3 optimisers!!

 

[powervan]

Would be first one?

 

[powervan]

never used solar edge but job got shading issues

 

[dansk]

No probs with that AFAIK

 

[dansk]

OK - A few tips:

As soon as inverter arrives log on to Site Registration and register the inverter with the S/N as per instructions, this enables the online portal to be set up during install. do install and make a map of the peel off bar codes like the attached.

Also VERY important, make sure you wire the CAT5 as per instruction attached.

Then submit site plan to SE for them to physical map the installation to report in the portal.

 

[powervan]

umm u sure its simple as im a simple lad

 

[powervan]

Thanks for that!!!!!

ok - a few tips:

As soon as inverter arrives log on to site registration and register the inverter with the s/n as per instructions, this enables the online portal to be set up during install. Do install and make a map of the peel off bar codes like the attached.

Also very important, make sure you wire the cat5 as per instruction attached.

Then submit site plan to se for them to physical map the installation to report in the portal.

 

[dansk]

Piece of cake my man - infact i find it easier than normal strings - reason being - you can install all the modules and get all the string cables clipped up before panels go on, then simply plug each panel into each module, less faffing.

 

[dansk]

Ohh - depends on your mounting system, but i use Renusol and i buy extra "T" bolts and nuts to bolt the optimiser onto the rail.