Suspending galv trunking

[Jackflash]

Hi, installing some 50x50 glavanised steel trunking with steel conduits branched off to supply power to lights and sockets.

part of it (about 8m x 8m 'L' shape) is to be suspended 1ft from the ceiling.

what is the simplist way to do this?

thinking unistrut screwed to the concrete ceiling with 2 lengths of 10mm threaded rod held with 'zebs' suspending another length of unistrut for the trunking to sit onto. The bottom unistrut held with square washer with nut.

any thoughts much appreciated!

Thanks

 

[Sintra]

Use 50mm suspension brackets ( stirrups) saves on the strut.


Sent from my iPhone using Tapatalk

 

[Jackflash]

ah, Like this one? or is this only suitable for 'lighting trunking'. ideally want the lid to be on the top to make it easier when putting all the cables in.

Buy Newlec Trunking Suspension Bracket, Steel, 50mm x 50mm, 9.6mm Hole - NL2205A

Thanks

 

[pennywise]

How about these.

50 x 50mm Suspension Hanger [GBT50SH] - £2.19 : Cable Management Warehouse

and the ones sintra mentioned you can turn the trunking up which ever way you like, when the lid side is on top just cut the lid where the bracket is as its supporting the trunking from the bottom not the top.