Test sheet recording Zs & Ze etc

[johntom]

Hi
When I test R1+R2, Ze and Zs and record them on the test sheet, do i record the Zs (as measured at all socket outlets) or do i have to make it fit using Zs=Ze+(R1+R2) ?
Obviously the measured values will differ from socket to socket etc and the R1+R2 will be the highest on the circuit, so the Zs won't equal Ze+(R1+R2) what do i record?
Got my elecsa on Thursday and don't want to fill the sheet in wrong!

 

[Mr Mark Sparks]

record exactly what the meter says
the r1 r2 will quite often not add up exactly with the ze because the current flow of the eli test will power through a connection and an ohm meter wont

 

[johntom]

That makes sense, the sheet does say 'the highest measured Zs'. However when i did the C&G 2392 exam in february I was told to change either the (R1+R2) or the Zs, but can't remember which?
many thanks