Discuss Testing Main Gas Pipe in Commercial Kitchen in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

D

DanBrown

Sorry guys!, im kinda new to this testing stuff.

If you were called to connect a gas solenoid valve to a supply, I take it that it would it be nesessary to check the main gas earthing is in-place beforehand..

If this is so, what test would be required? and how would you do it??

Thanks in advance!
 
Sorry guys!, im kinda new to this testing stuff.

If you were called to connect a gas solenoid valve to a supply, I take it that it would it be nesessary to check the main gas earthing is in-place beforehand..

If this is so, what test would be required? and how would you do it??

Thanks in advance!

ouch!!!!!

Ok Dan

what you are talking about is the Main Protective Bonding to the gas pipe(because its an extraneous conductive path)

Earthing and bonding are entirely different things, and are there for entirely different reasons

You will be carry out a continuity test using a low resistance ohmmeter, and you will need to disconnect the bonding at one end to eliminate parallel paths

you will quite often need to use a wandering lead to reach from the BS951 clamp back to the MET, remember to null the wandering lead when you null your meter leads;)

I have a feeling we may be chatting quite a bit in the near future.....:p
 
Thanks Shakey!..
Yeah i must agree with you there.. You seem to know you stuff and hopefully i can get more advice from you..
Thanks Again
 
Thanks Shakey!..
Yeah i must agree with you there.. You seem to know you stuff and hopefully i can get more advice from you..
Thanks Again

no problems, there is a good range of knowledge on this forum, i teach this stuff so i am 'up' on the regs, testing etc

Others have deep knowledge in different areas

ask away old chum;)
 

Reply to Testing Main Gas Pipe in Commercial Kitchen in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock