A
andy
when testing ring final circuit , resistance of open ends of phase conductor r1 + resistance of ends of cpc conductor r2 = R1+R2 /4 why is quartered could anybody explain
Discuss testing ring final circuits in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to testing ring final circuits in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
Hi All,
Had a weird one this morning during an EICR.
Testing a ring final circuit in a 2 bed flat… kitchen was on a separate ring. With only the...
Please advise what I should test / check next.
My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Hi All
Happy new year to all!
First post but long timer lurker, so thanks for all the previous help!
Just wanted to clarify something I have...
After fixing a few CPC related issues on a ring final I got the following results
L-L = 0.47
N-N = 0.47
CPC-CPC = 0.69
R1+R2 Tested at 0.31...
I'm practising EICRs on friendly locations as I'm still in training - technically done my 2391-52 but frankly need loads more practise.
I've just...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.