Test Meter - Forum Sponsors since 2007!
This official sponsor may provide discounts for members

Discuss Testing with 2 consumer units in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi all, quick question, if I fit a new small consumer unit for a shower do I just test this board or do I need to test the existing house consumer unit as well ? Thanks Ian
 
Aico 3000 Range
This official sponsor may provide discounts for members
  • Thread Starter Thread Starter
  • #5
Hi, thanks for the replys, there is a Henley block I was going to connect it to
 

telectrix

-
Mentor
Arms
Esteemed
You must still check if the main bonding is in place.
and main earthing, Ze, PSCC etc, but no need to test existing circuits from existing CU.
 
Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members

Reply to Testing with 2 consumer units in the Electrical Forum area at ElectriciansForums.net

Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Top Bottom