Texecom Control Panel - Remote connection

[mohamezm]

Hi,

Can any one help with instruction on how to connect up a two channel receiver to a Texecom Control Panel.
I would like to add a remote panic and remote (arm/disarm)

Thanks

Regards
Ziyed

 

[NrVolts]

does you 2 channel receiver have 2 volt free contacts? like vellman mk161

 

[tazz]

You can added Panic button via NC and Com acrross the pa on the panel, but the Texecom has no inputs for arm and disarm

 

[NrVolts]

You can added Panic button via NC and Com acrross the pa on the panel, but the Texecom has no inputs for arm and disarm

ever heard of programming a zone as keyswitch?

 

[tazz]

yes but program not available on veritas, only final push button exit

 

[NrVolts]

on veritas i agree .but then nothing was said which panel.

 

[tazz]

Just found lastest Veritas can be armed/diarmed by zone, remote reciever will need to be set to toggle. zone no = set, zone nc = unset,

 

[NrVolts]

i was thinking about zone type 15 -moment key- on premiers.
wrong place for this isnt it? alarms cctv i would have thought.any chance of access?

 

[tazz]

zone type 18 on latest veritas 8, R8 etc