Scolmore Electrical Products
This official sponsor may provide discounts for members

Discuss Threading conduit (no vice) in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Make 2 Vs out of some wood then clamp them in a vice. Not tried it myself but that's what I would do . I have metal V blocks that I made a collage that I find handy for clamping tube to saw it
 
SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members

Megawatt

-
Arms
I forgot I had a small conduit job tomorrow and I left my conduit bender at work. This means I dont have any kind of vice to hold the 25mm galv whist I thread it.

Any imaginative ideas on how I can thread it without any kind of vice?

I have some clamps but no vice so to speak....
Try and use a pipe wrench and wedge it somehow to keep the pipe from turning
 

Reply to Threading conduit (no vice) in the Electrical Forum area at ElectriciansForums.net

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Top