- Reaction score
- 4
Hi guys, Am doing a industrial job that will be using 32Amp three phase welders, there is not a masive budget on this job but common sense tells me to use Mem excel isolators due to the breaking currents but do you think I could get away with rotaries instead to keep the cost down or are they all cheaply made and a no go for this type of equipment.
Reason i ask is all will be on 3p&E sockets anyway, job has quite a few supplies i'm running and wanted to keep it uniform but the cost is knocking it up higher than i wanted. was just after your thoughts. cheers.
Reason i ask is all will be on 3p&E sockets anyway, job has quite a few supplies i'm running and wanted to keep it uniform but the cost is knocking it up higher than i wanted. was just after your thoughts. cheers.