Discuss Tv aerial question in the Freeview and Terrestrial TV Forum area at ElectriciansForums.net

Here is our aerial. Looks like it is from ours but just wondered if it was an important part didn’t want to call an aerial person if not necessary

View attachment 51862
looks like half the reflector has broken off. if the TV pic. is OK, then I'd not bother till the other half joins it ready for the scrap run.
 
the reflector reflects the signal back and into the coax that's connected to the box just in front don't know the full technology, but it just works.
 
the reflector reflects the signal back and into the coax that's connected to the box just in front don't know the full technology, but it just works.
You missed out the 'driven element' that sits in front of the reflectors... it's this that is connected to the coax (or 'feeder' as it's more generically called). This type of aerial is called a Yagi...

...just sayin
 
You missed out the 'driven element' that sits in front of the reflectors..
also the PCB Baun that coaxes a Balanced signal
(opposing phases signals)
Into just the core of the coaxial cable.
..Since the change over plenty of transmitters are kicking out more power , so may be of little consequence.
Birds perching on it may not have helped !
 
Last edited:

Reply to Tv aerial question in the Freeview and Terrestrial TV Forum area at ElectriciansForums.net

Similar Threads

I have lost the use of my two loft TV aerials due to interference from the installation of foil backed dense foam insulation. I guess this is...
Replies
2
Views
306
I have a known working TV and went to set it up in another building for an old chap. He has about 3 TV's already. I connected the TV to 2 seperate...
Replies
4
Views
628
Hi everyone, I am new to the forum and wanting some advice regarding a tv aerial. I moved into my own flat and bought a tv, however when I...
Replies
15
Views
2K
Hi, New to the forum. I have two very specific questions, for the setup below. Setup details: Currently I have a setup with an outlet used for...
Replies
6
Views
552
Hi, I currently have a Megger 1730 v1 which is fine for all functions except the 2 wire (L-E) no trip loop test, (no 3 wire loop test on my 1730)...
Replies
0
Views
331

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock