Unreal........you have got to watch this

[westward10]

Maybe, but he is correct.

That poor builder just did the best he could now some cock is pulling him apart on YouTube.

 

[jackhammerJIM]

I went to a job this week where the customer has done about 50K refurbishing their house....New kitchen, bathrooms, heating system, plastered, wood work, decorating, carpets the lot and the house is mostly still wired in TRS that falls apart as soon as you look at it. The Prat didn’t consider the electrics

Ouch , thats going to hurt

 

[westward10]

Ouch , thats going to hurt

Probably took Lee a week to stop laughing.

 

[ipf]

I said something like “ why the F have you done that” his reply “it’s a good, chase out what you need to and we will just easi fill it”

What do you expect from an Italian...……..

 

[Pete999]

That poor builder just did the best he could now some cock is pulling him apart on YouTube.

Quite rightly in my opinion. Educate the General public.

 

[ipf]

That poor builder electrician just did the best he could now some cock is pulling him apart on YouTube.

........You mean

 

[Pete999]

My thoughts exactly I just want to shout BLOODY GET ON WITH IT!! Like that other tw*t Nagey.

You may think Nagey is what you call him, but he is getting his Name around and getting dosh posting his vids on Youtube, same as Matey on the video we are discussing, good luck to them I say.

 

[ChrisElectrical88]

I mean technically the Zs readings were ok as there was 30mA RCD protection.

Also the fitting in Zone 1 was IP44 which he then said he woukd add to the list?

 

[westward10]

You may think Nagey is what you call him, but he is getting his Name around and getting dosh posting his vids on Youtube, same as Matey on the video we are discussing, good luck to them I say.

None of that prevents him being what I think he is.

 

[jackhammerJIM]

I mean technically the Zs readings were ok as there was 30mA RCD protection.

Also the fitting in Zone 1 was IP44 which he then said he woukd add to the list?

He also stated because of the MICC it should have been rewired ...

 

[ipf]

None of that prevents him being what I think he is.

Come on, Westy……...he's just trying to break out into his new acting career..

 

[Baddegg]

And he had a LAP socket tester! Surely he needs slapping for that alone?

 

[magnoliafan89]

My mate is doing his ex rental up to sell i said i couldn't spare the time...so now the plumber is botching the diy.

Spare a few mins the other week to check why the lights kept tripping the rcd found he'd pinch the one cable in the switch but on further examination of a new wall light hed connected a neutral and cpc together, no sleeving on any cpcs joint box after joint box.
These sort of things are so common its unreal

 

[TJ Anderson]

Love the fact he gets a Zs of over 7 ohms at light fitting aprrox 4M away from CU and he then feels he needs to check it against OSG value. FFS. Nob.

 

[westward10]

These YouTubers are legends in their own tiny minds.

 

[Toneyz]

He also stated because of the MICC it should have been rewired ...

It was all the additions not so much the MICC installation.

 

[Markyd]

A lot of people on here busy slating the guy who made the vid......yeh ignore the crap work and have a pop at him.....let's see you put a vid up so we can all have a look at you......jesus

 

[Deleted member 26818]

IP 44 = IP X4.

 

[westward10]

A lot of people on here busy slating the guy who made the vid......yeh ignore the crap work and have a pop at him.....let's see you put a vid up so we can all have a look at you......jesus

Aside from slating some poor builder trying his best the bloke is an idiot.

 

[PEG]

Just watching it makes me want to punch that tw*t.

I was going to post,about punching this individual,being a little harsh,based on this one video.
I then remembered,another of his videos,i was lucky enough to enjoy,and recalled the feeling that on that occasion,a punch is what he required.

I cannot say,if on either occasion,physical admonishment,is warranted......but the evidence is stacking up...