Discuss What code should this shower be? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Reaction score
2
Hi all, I was with my senior yesterday doing a EICR for a domestic house. All of works are fine apart from this shower as shown below.https://Upload the image directly to the thread.com/5Egm5ez
https://Upload the image directly to the thread.com/nkXD5Sp
Shower is low and tiled around. I was suggesting to give it a C2 as water might get in contact for such low height. But my senior was saying it's just a C3 as the shower's cover didn't has any sign of damaged and is protected by RCD.
Just curious for you guys to code this, which code will be in your certificate?

Thank you very much for all your input.
 
Upload the image directly to the thread - https://Upload the image directly to the thread.com/5Egm5ez
https://i.Upload the image directly to the thread.com/5Egm5ez.jpg
 
Providing it's installed in accordance with the manufacturers instructions, no code. I did question such a situation myself recently when I was asked to remove a shower unit and move it to an en-suite where the shower had packed up. The ensuite had it mounted at about the same height.

Checked the manufacturers instructions and according to them it was OK.
 
Quite clearly no code if the case is undamaged and RCD protection is in place. They are all made to minimum IPX4 and are designed to get wet and route the water down and off the unit away from any internal spaces.
 

Reply to What code should this shower be? in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Similar Threads

Hi All New to this forum, have read the posts on here from google but only recently signed up. I'm having some issues and some input would be...
Replies
13
Views
1K
Recently visited a new build to do a very minor job and spotted a few dodgy looking items so Client asked me to do an EICR. Following items I...
Replies
6
Views
919
Good day. First time poster. We recently had an electrician perform the EICR, as this is a newly purchased property I thought'd I would have the...
Replies
7
Views
656
I was surfing through one of the electrical training groups on Facebook yesterday and came across this question from an AM2 prep course: There...
Replies
7
Views
943
Hi everyone Ive just had an electrical condition report conducted on a mixed-use property, and I am extremely surprised that after the last report...
Replies
11
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock