Discuss Wiring an electric cooker in the UK Electrical Forum area at ElectriciansForums.net
Share this page
- Reaction score
- 17,000
Possibly.
Highly likely
Although saying “30 Amp” suggests old fuses. Should be 32A circuit breaker with additional RCD
Highly likely
Although saying “30 Amp” suggests old fuses. Should be 32A circuit breaker with additional RCD
- Reaction score
- 17,000
Ok… so what is the cable size and what is it supplying now?
Reply to Wiring an electric cooker in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi All,
We have an old Country villa in Spain. The housing electrics were not good so the house recently has been completely re-wired to a good...
Wiring cooker hood into a switched fuse spur with a 13amp fuse in the spur. The cooker hood is 3amp. Should I swap out the 13amp fuse in the spur...
I have had my kitchen rewired ready for a new kitchen. I was originally going to have a gas cooker so a 3 pin 13a socket was left on the end of...
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit.
This is not used...
Hi, can someone please advise on where if anywhere I may acquire an adapter to duct out this old Elica cooker hood. The hole is 150mm x 90mm and I...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.