- Sticky
Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..
Rules....No Offensive...
- Question
Hi
The most recent post in Electrical Tools and Products is actually showing the most recent post in the main electrical forum.
The thread...
Doing some work in a commercial restaurant/kitchen the builders had already boarded and plastered the walls meaning my only viable route is to use...
I'd appreciate the wisdom of domestic sparks here...
End terrace early 20thC house:
Supply:
I've not seen the likes of this before in a house...
Looking to do some work in the consumer unit in my home and was wondering if turning the isolation switch is sufficient as it only appears to...
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
Hello
Ive been working for over 20years, done design course and fully qualified.
Looking into the professional registration with the Engtech...
90s house electric issues continues 🥲
So after getting some good advice here I've managed to sort out some of the heating issues so thank you...
Hi all looking for some helpful advice
I'm an Aussie so go easy on me, I have a good mechanical engineering head but first time plumbing and...
Hi
I have a job where customer has two families one families lives upstairs and one family will live downstairs.
As the property is going through...
Hello all,
I am new to PAT testing and have a Fluke 6500-2. I am having an issue whereby I cannot seem to drop the voltage down to 250V when...
I was wondering what is the cheapest option to get a (legitimate) copy of the EN standards, such as IEC/EN 62305 on lightening protection?
I...
We have a customer in a large office block with all power in the building fed from an Electrak plug in busbar system. Lots of desks, lots of...
Hi my name is Gintas I connected solar hybrid inverter to my house ring supply and it work very well everything except the gas boiler for on...
This is the last thing I have for sale if anyone wants a new screwdriver set
Wera quick change handle
Torx 15,20,25
Slotted 4mm, 3.5mm (and a...
I've been retired a few years now so no longer active in the industry, but I've been doing electrical "stuff" for most of my life.
Trained as a...
A relative on holiday in Mexico sent these photos.
I'm not sure if the guy at the base of the ladder is still breathing...
The electrician that installed my cooker circuit put in 10mm cable with a 32a fuse, a 45a cooker switch and 10mm cable to the backplate for behind...
Hi All,
My colleague and I are currently doing PAT/ISITEE Testing, and we've hit a snag with a bit of equipment - we've got 19" Racks for our...
- Locked
Hello electricians!
I am in university and as my final project, I am developing and designing a first aid kit for electricians. This will probably...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.