**Show Us Your Installs!!!** | Page 73 | on ElectriciansForums

Discuss **Show Us Your Installs!!!** in the Australia area at ElectriciansForums.net

S

Spudnik

Right chaps,

Due to a few unavoidable issues, we have lost the original thread and pics etc.

Sorry about that!!!

So, if you want to re-upload your pics then great, if not, give us something new!


Cheers!!
 
I'm sure somebody will jump in and tell me it looks crap (inb4 heat shrink) but I think it was a good effort with the very limited room for my first 240mm 4 core. Temp supply connected to a 400amp generator, which was huge

[ElectriciansForums.net] **Show Us Your Installs!!!**
[ElectriciansForums.net] **Show Us Your Installs!!!**
 
heres a few of the installs i done since i finnished my training
theres some decorative work from a regular customer of the company i do work for aswell as another (solar firm) mostly solar there but thats all i did for 18 months and was a very busy 18 month most the time it was 7days a week all day and over time
View attachment 22357 View attachment 22358 View attachment 22359

each install below took 2-2.5 days with the odd 3 days to all put together

View attachment 22356

View attachment 22360 View attachment 22361 View attachment 22362

View attachment 22363

View attachment 22364

View attachment 22365 View attachment 22366
i hope that hot tub is TT....
 
How can you judge the size of the cable with no scaled point of reference?

It looks like a neat job to me, it certainly shows up the naff job the generator builders have done!

Which bunch of monkeys built that particularly badly laid out generator?
 
Which bunch of monkeys built that particularly badly laid out generator?

Cummings power generation did the lot I think, engine itself is something like 9 litres


looks ok to me, also seems small for a 240mm?

It certainly was, took 3 guys to lift, angle and persuade it into the thing :smilewinkgrin:



Rough job that, lot of copper showing there.

Given the buzz bars are right next to it, it's more ascetics than anything at the end of the day :leaving:
 
Last edited by a moderator:
Cummings power generation did the lot I think, engine itself is something like 9 litres







Given the buzz bars are right next to it, it's more ascetics than anything at the end of the day :leaving:

They’re only buzz bars if you touch the while they are live, most of the time they’re busbars.

I will agree with Dave, the panel is crap. The N→E link looks dodgy to say the least.
 
Wana c a dodgy N to E link ??saw this today
[ElectriciansForums.net] **Show Us Your Installs!!!**

Ad least you can isolate the main earth ,
 

Reply to **Show Us Your Installs!!!** in the Australia area at ElectriciansForums.net

Similar threads

  • Sticky
  • Question
Best Electrical Courses I endeavour to create a "best electrical courses" thread for 2025 (so training courses that did well during 2024 are the...
Replies
0
Views
1K
S
  • Article
Low pressure mixer spray tap recommendations ? I'll be installing a new kitchen, DIY, and the Mrs wants a mixer tap with a switchable...
Replies
0
Views
152
Splitty
S

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top