DPG's latest activity
-
Thank you for the update. Good work! Could you clarify what you are measuring voltages relative to - is it 'earth', eg the incoming... -
I think the letter 'W' within the omega symbol is the trademark of the manufacturer - Welwyn Components as they are known. It's quite a...
-
Well it is progress at least. With so much conflicting info getting the DNO to survey is the right thing. You will get a definitive...
-
DNO says their records don’t state what earthing they provided - which is very helpful! Waiting for them to book in a survey and will...
-
If it is 6mm2 cable all the way, then it's very probable that the 16A MCB could be replaced by a higher rated one, if the correct one is...
-
Absolutely correct. if you feel inclined, you could put it all back together without the filter, having removed that capacitor and...
-
Not on new stuff. Two of my TNS supplies have split concentric service cables coming up from underground ducts, into service heads...
-
Thanks both so much. I suspect Octopus have made a mess of it as the guy didn’t fill me with much confidence and everything else says...
-
It is impossible to say for certain the earthing system without being there to investigate. I'm wondering if that earth you moved was...
-
Yes you can cut it and work the wrapped bits off. If you keep it hot enough you should be able to work them off with long nose pliers...
-
Providing certain criteria are met then Part P notification will not be a requirement. These are in England :- 1. The work is not in a...
-
Also be aware that a 7.5kW will never take that full load. There are various discussions on here about how to calculate the design...
-
According to the 2nd diagram all resistors are 560 Ohm +/- 10% This is backed up by the picture you posted of the resistors we can see...
-
DPG reacted to Avo Mk8's post in the thread Why does it cycle resistance on an open circuit? with
Like.
The pic is not super clear, but you seem to have the black probe in the central terminal block of the ceiling rose (normally the looped... -
Using the nomenclature in post #5, if it is R1 that has gone bang, I would suspect C1 is faulty (s/c?) as R1 and C1 are in series across...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
