plugsandsparks's latest activity
-
PI would be ashamed of it, if I had installed it like that. don't think there is anything to code. assuming of course that the conductors...
-
PHaha, I guess so... Well two things fixed the problem, not sure which or both. 1. Moving the lighting ring to the other rcd, leaving...
-
Pplugsandsparks replied to the thread 63A RCBO.The diagram shows overload trip on both poles
-
Pplugsandsparks replied to the thread 63A RCBO.See attached file (added by Dan)* Says supply (grid) can go top or bottom, i would tend to use 1 for L and 3 for N
-
Pplugsandsparks replied to the thread UK Problem with EDF not recognising 3 phase in commercial unit.As above we need to see where the cable enters the property from the grid and where it first terminates, then follow it as the meter...
-
Pplugsandsparks replied to the thread UK Problem with EDF not recognising 3 phase in commercial unit.Gosh, can you take more photos of the 3 phase service head and the old meters, if that is the new meter, it is either a re-furbished one...
-
Pplugsandsparks replied to the thread UK Problem with EDF not recognising 3 phase in commercial unit.Few questions: You say you had 3 supplies, i.e. 3 MPANs and 3 meters and received bills for all three prior. The only authorised mover...
-
Pplugsandsparks replied to the thread UK Need help with cables.Difficult to say, its possible that, although switched off, it could be a loop through for other stuff like lights. If so then something...
-
Pplugsandsparks replied to the thread RCCD tripping but subsequently found the problem.The other devices in the adapter could have been class 2 devices and the a/c class 1. A portable a/c does not really pull that much...
-
Pplugsandsparks replied to the thread 24V Led Lighting - Cable size confusion.Put driver close to LEDS
-
Pplugsandsparks replied to the thread UK Power factors.Different meters can measure different things, e.g. They will all measure KW as generally that is what you pay for, many meters will...
-
Pplugsandsparks replied to the thread UK Power factors.I would first check that all CT connected meters have been set up correctly, i.e. CT for L1 is actually on L1 etc, they should line up...
-
Pplugsandsparks replied to the thread DALI lighting, need some basic info.Another question, even though the controller spec indicates 3 X 64 drivers, could you have a group of lamps, say boardroom fed from say...
-
Pplugsandsparks replied to the thread DALI lighting, need some basic info.Sort of confirms why someone needs to contact Philips. Below is a basic spec PDF...
-
Pplugsandsparks replied to the thread DALI lighting, need some basic info.If it was my project , i would be getting the design approved by the manufacturer, Philips ? The last one i did, the biggest decision i...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
