w0z's latest activity
-
w0z replied to the thread Add LEDs to Vintage Radio?.Parwallel is fine, originally i thought you said 9V which is why I suggested series as up to 4 or 5 in series at 9v with a series... -
w0z replied to the thread Add LEDs to Vintage Radio?.I was going to suggest measure the resistance when you're satisfied the brightness is correct and change the potentiometer for a fixed...
-
w0z replied to the thread Add LEDs to Vintage Radio?.yep sorry when I replied I hadn't seen the photo of the parts, and the OP originally said he had a 9v supply hence my reply. I agree...
-
w0z replied to the thread Add LEDs to Vintage Radio?.If the leds are all the same you can connect in series, with an appropriate current limiting resistor, they will each drop the same...
-
w0z replied to the thread Add LEDs to Vintage Radio?.Not recommended, definitely not recommended don’t even think about it, it might work briefly with some leds but you’ll see them off with...
-
w0z replied to the thread LED tape with effects.I have the Olight ones, you can program each with the same program, and there are lots of preset programs BUT they aren't synchronised...
-
w0z replied to the thread Add LEDs to Vintage Radio?.You're welcome Given that it's a vintage radio I'd try and keep it as original as possible (that's just me), did it have any original...
-
w0z replied to the thread Hobby Why I?.Ampere used the "i" notation in his original work and it stuck. I hadn't heard the intensity explanation before reading this thread...
-
w0z replied to the thread Add LEDs to Vintage Radio?.If all of the leds are the same you may as well connect them in series then you only need one resistor. This is the most simple method...
-
-
-
w0z replied to the thread Hobby Why I?.The C word has long since been hijacked... (or so j imagine)
-
w0z replied to the thread Lights Flickering when turning on at different switch.Also check all of the wires are securely terminated in the other switch.
-
w0z replied to the thread A MYSTERY? 24VDC blowing fuses.@damunk What does this mean? "James; The connectors are indeed the 2 pin and I have wired the kill switch wire to the -24VDC . Perhaps I...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Advert
Advert
TrueNAS JBOD Storage Server
-
-
Understanding TrueNAS JBOD Servers: A Comprehensive Guide- Started by Dan
- Replies: 8
-
