charity Ze

[Tridentsystems]

8 ft 5/8 rod driven in to undisturbed agricultural land. Rocky soil, clay at four foot depth. Guesses for Ze in a postcard please ! Supply goes in tomorrow so result soon. Closest guess picks the charity and I will send it £50. Just a bit of fun. Two decimal places please !!!!

 

[loz]

my guess 32.28

 

[Sintra]

Great idea I will go for 27.6 ohms

 

[Marvo]

Can you give me a hint please, what kind of ground have you got (chalk, clay etc)

 

[Tridentsystems]

It's brown with a green top.

 

[Tridentsystems]

Not chalky, clay at four foot about three foot thick then back to rocky.

 

[Sintra]

Can you give me a hint please, what kind of ground have you got (chalk, clay etc)

Need to read the op mate

 

[Marvo]

my guess 32.28

Great idea I will go for 27.6 ohms

If he got anywhere near that with a single 8ft rod I'm gonna kick my wife's dog in disgust. I was on site today where my team put 14 2.3meter rods in last week and we're still sitting with 244ohms I've had to program another 2 days next week for improvement. I hate the UK with your 30 ohms at 3ft!!

 

[GLENNSPARK]

422 ohms

 

[robsparky1975]

Ra 11.37

 

[Marvo]

I know Glenn knows a thing or two about earth rods so I'm going with 450 in that case.

 

[Tridentsystems]

Bloody hell Glen I hope not. Was hoping for .35 and an easy life. Why do apprentices hate lump hammers ??

 

[Brightspark2]

8.12


A wild guess...Good on you for this game too, very generous...

 

[Aindowsimon]

100ohm

 

[Marvo]

Why do apprentices hate lump hammers ??

Probably because lump hammers aren't forced to make the tea four times a day.

 

[Aindowsimon]

TT earth around were I live is a pig of a job all frigin granite and slate

 

[Buzz-light-bulb]

160 ohms

 

[telectrix]

47.95 ohms is my guess.

 

[timbobelfast]

15.45 Ohms

 

[Benjamiin]

47.27 ohms dry, 18.47 after you've got a bucket of water on the case

 

[ipf]

>999meg

Am I getting mixed up here?

Just finished Part Peee course on friday.:wink5:

 

[Tim]

20.11.

 

[Anthony King]

61.28 ohms for me

 

[Tridentsystems]

IPF if you finished on Friday then you have gained enough experience by now to have an educated guess !!!!!!

 

[Badfish]

37.05 for me.

 

[trev]

I'm going to go for 5.87 just for a daft laugh because I think it's going to be surprisingly low.

 

[ipf]

IPF if you finished on Friday then you have gained enough experience by now to have an educated guess !!!!!!

Thanks mate, just thinking, will these do the job

 

[Des 56]

11.42 ohms
If you were on the beer lunchtime it then reduced to 9.2

However, the meter reading may have been a little blurred, I will stick with 11.42 if you please

 

[Brightspark2]

I'm going to go for 5.87 just for a daft laugh because I think it's going to be surprisingly low.

I agree.


Has anyone come close yet?...

 

[GLENNSPARK]

I agree.


Has anyone come close yet?...

well if they have then its a unique window into the future...
he hasn`t started brayin it in yet....
tomorrow...

 

[Taylortwocities]

OK, I'll have a go52.66 ohmies

 

[keniff]

16.8 is my guess! Good idea by the way!

 

[Engineer54]

I'll play, ....I think it may just surprise you. I'll go for 15 ohms if it's been recently raining and 25 ohms if the top layer is dry!! lol!!

 

[GLENNSPARK]

I'll play, ....I think it may just surprise you. I'll go for 15 ohms if it's been recently raining and 25 ohms if the top layer is dry!! lol!!

hmm...we`ll see..:59:

 

[Kate]

33.33 ohms

 

[Plonker 3]

1.45 ohms

 

[Engineer54]

1.45 ohms

Now that is wishful thinking!!! lol!!

 

[High Tower]

17.50....

 

[KFH]

68.93 for my guess.

 

[Phil L]

Going for 23.22