Search results

  1. JK-Electrical

    Wetpants Trashed My Van

    11 months after the event, I've finally received a satisfactory offer from Wetpants' insurers. It was hard work trying to get them to accept 100% liability, but I got there in the end. At first, they tried to palm me off with a 50/50 admission, but I was having none of it. Wetpants was 100% to...
  2. JK-Electrical

    EV Charger Installation - Cabling Query?

    None whatsoever. The DNO should already know about this install as electrical contractors are obliged to inform the DNO whenever EV chargers have been added to an existing installation. Sometimes notification needs to be given in advance of the install.
  3. JK-Electrical

    EV Charger Installation - Cabling Query?

    Judging from the photos you have posted, I can't see anything wrong with this install. Tails are fine, correct type of RCD. Did the electrician give you an Electrical Installation Certificate in respect of the work? If so, what type of earthing system has the electrician listed on the...
  4. JK-Electrical

    A Rather Obvious Forged EICR

    That was my conclusion too. There is insufficient capacity in the main board. All the ways have been used. One of the breakers has three conductors. Two supply the main area lighting and emergency lighting. The other supplies one of the shuttered doors of which there are five in total. Another...
  5. JK-Electrical

    A Rather Obvious Forged EICR

    The person who did the work advertises himself as an electrician. However, I would advise him to quit the trade and seek alternative employment.
  6. JK-Electrical

    A Rather Obvious Forged EICR

    There's a fire alarm panel, smoke alarms, call points and sounders present. I noticed that the panel is indicating a fault condition. However, no certificate other than a MEIWC has been issued. Whoever did the work submitted a MEIWC to cover the design, installation and commissioning! There is...
  7. JK-Electrical

    A Rather Obvious Forged EICR

    You are correct. I'm informed that prior to a 16mm SWA being installed to supply a sub-board for the office area, one of those twin and earths was acting as the supply cable! Apparently whoever installed the sub-board connected all the final circuits, but for reasons best known to himself...
  8. JK-Electrical

    A Rather Obvious Forged EICR

    These SWAs were wrapped together with plastic cable ties and left dangling.
  9. 20190807_100228.jpg

    20190807_100228.jpg

  10. JK-Electrical

    A Rather Obvious Forged EICR

    This is how the wiring looks when viewed from behind the board. All the cables have been taped together and left dangling.
  11. 20190807_100237.jpg

    20190807_100237.jpg

  12. JK-Electrical

    A Rather Obvious Forged EICR

    This is a brand-new board. Words fail me.
  13. 20190807_100136.jpg

    20190807_100136.jpg

  14. JK-Electrical

    A Rather Obvious Forged EICR

    The only clip securing the tails and main earth is that solitary T&E clip.
  15. 20190807_100222.jpg

    20190807_100222.jpg

  16. JK-Electrical

    A Rather Obvious Forged EICR

    Deep gashes in the L1 and L3 tails.
  17. 20190807_100125.jpg

    20190807_100125.jpg

  18. JK-Electrical

    A Rather Obvious Forged EICR

    40 amp breaker fitted to a ring final circuit!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert