Search results

  1. J

    Can I use multiple GU10 led lamps with their own PIR sensors in one room?

    Excellent answer, makes complete sense now. Thanks
  2. J

    Can I use multiple GU10 led lamps with their own PIR sensors in one room?

    Thanks. The lamps were installed 4 years ago and some need changing. I thought as I am buying new bulbs I could try pir ones.
  3. J

    Can I use multiple GU10 led lamps with their own PIR sensors in one room?

    Thanks, they are along a corridor so only briefly used. I saw on aliexpress that two can't be used in a room together which is why I checked here. Here is the link that concerns me. - 6.43€ 61% de réduction|Ampoules Ronde Led Gu10 Pir, À Lumière Blanche Et Capteur De Mouvement, Dispositif 5 À 50...
  4. J

    Can I use multiple GU10 led lamps with their own PIR sensors in one room?

    Can I use multiple GU10 led lamps with their own PIR sensors in the same room? I have a row of existing lamps 600mm apart in a straight line & I would like to leave them turned on but only come on when someone is there. Here is a link to the type I am considering if it is possible. -...
  5. J

    Measuring 3 phase usage with a clamp meter?

    Thanks I'll pass that on to the sparky. It is a neat solution so I will probably go for the Hager.
  6. J

    Measuring 3 phase usage with a clamp meter?

    Thankyou for all your replies. Hager do one that will fit in their distribution board but it is over £430.00+vat. I found this at CEF - 3 Phase Multifunction Energy Meter MID Certified with Pulse and Modbus -...
  7. J

    Measuring 3 phase usage with a clamp meter?

    About 80A max
  8. J

    Measuring 3 phase usage with a clamp meter?

    Good morning, I have a 3 phase supply into my workshop Hager dist board. I need to measure my usage for business accounts. My Electrician mentioned clamping around the swa cable with a ct clamp would be a simple metering option, but I'm not sure if I understood him correctly. Is this...
  9. J

    joining two feeds into one consumer unit.

    No problem, I've clearly misunderstood the forum guidelines and apologize for that. I did not realize that the forum was only for qualified electricians. I'm just too curious. My solar installer put a chock block in a 100A isolator that would have burned my house down had my wife not spotted the...
  10. J

    joining two feeds into one consumer unit.

    Yes I do, I thought it might be a good place to ask here while I was online. No need to be rude, if you don't want to advise others politely then perhaps a forum is not the place to spend your time.
  11. J

    joining two feeds into one consumer unit.

    Good morning. The dno can install the 3 phase meter box directly ouside the wall of my current meter which means that they can connect 1 phase directly through an existing hole in the wall and sort out the meter etc.. I'm very happy about this, nice and simple and neat. For the rest of the...
  12. J

    joining two feeds into one consumer unit.

    DNO site visit tomorrow. 😀
  13. J

    joining two feeds into one consumer unit.

    What rating curtain wire should I get?
  14. J

    joining two feeds into one consumer unit.

    I thought higher would be better as the trunking at my factory is at least 10 feet high it does not get splashed. If I fixed it to the top of the perimeter wall it would go over the windows but I suppose it will be ok.
  15. J

    joining two feeds into one consumer unit.

    Would it be ok below the windows? There is no room above the windows, they go to the top of the walls. I'm worried about splashing coolant onto the trunking.
  16. J

    joining two feeds into one consumer unit.

    I am only putting up the trunking around the perimeter of the workshop. There are loads of options where to put it as the roof trusses are exposed and make a great network of supports. If the sockets can go on the back or side it will be a neat job. He'll tell me tomorrow at the site visit the...
  17. J

    joining two feeds into one consumer unit.

    The dno will feed into a new meter box in the garage, this will feed a 3 phase distribution board. From this: Phase 1 will be connected to the house cu via existing swa. Phase 2 will be connected to the existing garage cu. A 25mm swa will feed the new workshop distribution board that will feed...
  18. J

    joining two feeds into one consumer unit.

    Just had meeting with Electrician and all is well. Thanks for all your input.
  19. J

    joining two feeds into one consumer unit.

    Good idea, I can just use two phases and somewhere for the third to be terminated.
  20. J

    joining two feeds into one consumer unit.

    Seperate consumer units then.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
Plumbers Forums | Plumbing Advice | Gas Forum
Back
Top