Search results

  1. D

    A MYSTERY? 24VDC blowing fuses

    As above first course of action taken is two separate the two motors with two separate fuse holders. I might even put a 1A in each as I don't want to damage the actuator motors. Does it make a difference whether to combine the neutrals on the PULSE transformer or keep them on separate rails...
  2. D

    A MYSTERY? 24VDC blowing fuses

    James; The connectors are indeed the 2 pin and I have wired the kill switch wire to the -24VDC . Perhaps I wired one of them to -24VDC and the other to +24VDC on the second connector. Not sure why it would mean it would work a certain way...
  3. D

    A MYSTERY? 24VDC blowing fuses

    As the title suggests; I have a fuse that is blowing on a 24VDC circuit. I was worried I had damaged the servo motors as they cost a bomb. the motors, I connect and disconnect at the BNC point on the diagram. I plugged them in and it was blowing fuses. I tried 1a 2a 4a (4 amp is ample). I...
  4. LUMPSHREDDERLDPE EREMA.png

    LUMPSHREDDERLDPE EREMA.png

    • damunk
    • Media item
    • Comments: 0
    • Category: Electrical Videos
  5. D

    Wiring diagram with USB/peripheral CONNECTIONS

    any help chaps :)
  6. D

    Panel building; is it too late?

    I have been to the college and been offered a place at Level 3 Electrical & Electrical Engineering. 2 year course; As an old bloke lol It kinda felt odd at the interview. I have also been offered a panel building 4 day course for £1600...
  7. D

    Wiring diagram with USB/peripheral CONNECTIONS

    Let's say in the conventional single phase electrical schematic drawings there is a pc motherboard. All the voltage lines, MCB's etc have been done. How would you now show for instance ; USB from the PC motherboard to a peripheral device such as a printer. Would it be a straight solid line...
  8. D

    Panel building; is it too late?

    Shall I just build them and get my fully qualified electrician just to check them out and give me a certificate. He is commercial and has done lots of three phase installation of machinery and panels. If it is shown that I have lets say 10 certificates from him and then I am building them all...
  9. D

    Panel building; is it too late?

    I am 40. dont hold any quals but have always done electrical work with electricians which included panel building. I have built a good few panels without fail. I am wanting to sell 240V single phase small panels for a gaming machine that I have built. Is a small panel building course enough...
  10. D

    contactor single phase L3 used as a pilot light

    Using a three phase contactor but in single phase so just live and neatural using L1 and L2 . Is it okay to hook up a pilot light on L3 terminal so when contactor is pulled in L3 becomes engaged hence pilot light turning on. I dont want to know about aux contact because I will be using that for...
  11. D

    EMINoise filter amp ratings?

    Guys RSEN"2030D but they are from US and the postage will be pretty big. I have been told these TDK emi filters are very good. Anyone can receommend some emi filters than will 100% be good as tdk ones,
  12. D

    electrical enclosures

    not as cheap as these;Metal Enclosure IP65 800mm x 600mm x 250mm - Galvanised Steel - https://www.tlc-direct.co.uk/Products/CMSB806025.html these are cheapas heck and come with 2mm mounting pate.
  13. D

    electrical enclosures

    hi guys. when you mount din rails into electrical enclosures ; does the screw show from behind the panel? does EVERY electrical enclosure come with a seperate rear plate spaced out where you can secure din rails into without screws bolts showing from externally. Thank you.
  14. D

    3 phase isolator switch

    thank you
  15. D

    3 phase isolator switch

    can I use the above isolator switch with single phase 240V wiring. live neutral and earth? its the right designed switch for me and also it is the right current rating.
  16. isol.png

    isol.png

    • damunk
    • Media item
    • Comments: 0
    • Category: Electrical Videos
  17. D

    EMINoise filter amp ratings?

    cant i just buy 4 of those good quality tdk lambda filters for each servo and bolt themsecurley to panel to get brilliant grounding.?
  18. D

    EMINoise filter amp ratings?

    also can you use just one line filter for 4 servos or is it okay to use 4 seperate ones , one for each servo
  19. D

    EMINoise filter amp ratings?

    if a servo driver has a amp rating of 9.5 amp single phase 240V and peak current at 30amp what amp rating should be chosen for a emi power/line filter? thank you.
  20. D

    sizing up mcb and a contactor

    im stucknow, so 6 mcb's with magnetic contactoras suggested in manual drawing for 3 phase althought imusing singephase 240v (theres no drawing for that) or 6 din fuse rail way. and using 6 bus bars (3+3); 2 for live 2 for neutral and 2 for earth. and using two seperate 40A feeds from main...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
Plumbers Forums | Plumbing Advice | Gas Forum
Back
Top