M

mogga

leaving tools at your bum
like everyone else Iv done it a few times over the years Iv also found a few tools as well Today i found a hacksaw but I think Ill be binning it as it looks like a Lidle 99p special and the blade had less teeth than my granny I also recon I know who left said hacksaw at their hin End

PAUL M was it yours ? livingstone store lol
 
Are you checking out my work Mogga?

Not mine mate, my hack saw is in my tool box (Ronson btw and not a 99p cheapo. That will be Phils :):):))

Probably left by the sign manufacturers, 99p saw sounds about right for that lot.

If your passing dumfries think I left my dust pan and brush there lol.
 
lol I was in dumfries yesterday but it was C/R not Storeys lol doing PIR on livvy not many code 2s n couple of breakers over rated but all in all not bad nick

Are you doing carlisle storeys ?? if so check the main incommer arrangement 3ph each through seperate conduits only fitted out about 6,7 years ago
 
Doing both c/r and S. Done one in carlise but couldn't do the other at the time due to the high lighting rig and I won't work that high on expendable ladders, not safe in my opinion.

Finished Scotland, only a few to do in the north east then I'm down south when it all kicks off in a couple of weeks. North Wales done, don't know when I'm in south Wales? Might have to pop round to Lennys house for a cuppa. Five stores in northern Ireland, might ask Ipu to meet up for a pint of the black stuff.

Home for the next week or so doing a shopping arcade internal & external lights, thermal tights and vest is going on tomorrow. Call me a big girl Mogga I don't care, I'll be warm at the top of the tower scaffold (8m on a tiled slope, looking forward to that one).
 
I had to stop for a quick picture at this place. My nickname is Maddo!

IMAG0324.jpg
 
Mogga if your doing PIR/EICR on the same places, have you come across this one yet? Let's play a game, spot the main 3ph isso switch?

Main incomer:-

IMAG0316-1.jpg
 
Earth?

IMAG0319-1.jpg


And it gets worst! There's a hole in the ceiling and when it started to rain all the boards get soaked!

Took photos, write a letter and gave it to the store manager, get in the van and drove off.
 
canny mind but I think Iv seen that snapped incommer before the MET looks not bad at least they are crimped come across ones just wrapped round the stud and one Dumfries i think where they had gone overboard on the earthing they had earths to everything twice to some things like "Parralel" lol was a pure messssssss
 

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Thread Information

Title
tools PAUL M
Prefix
N/A
Forum
Australia
Start date
Last reply date
Replies
10
Unsolved
--

Advert

Thread statistics

Created
mogga,
Last reply from
mogga,
Replies
10
Views
1,489

Advert

Back
Top