Hello all,
I'm a mere PAT tester and access this forum alot as I learn so much from it. I wanted to ask about like-for-like socket changes and issuing MWCs. I test fixed appliances also so I understand the correct isolation procedure. I often find damaged sockets and fused spurs and I'd like to...
Thanks Lucien. I set up a new autotest code to include earth bond and a 250v insulation test, but some SPD leads test out fine whilst others are still an issue. No particular brand or anything. It's very odd.
Yes, indeed. I noticed the extension leads I tested that failed still had small stickers over the screws on the back so indicated they hadn't been opened.
That sounds almost as bad as a coiled up and zip tied earth cable I found in the side of a washing machine... I spent way too much time...
Thanks very much James. As you mentioned, I did a visual check on all the plug tops so I know they are correct. And wise words too, it's very easy to believe there MUST be something wrong, when in fact, you just have to step back sometimes and analyse logically! :-)
Annoyingly on the Fluke DMS...
Evening all,
This has probably been answered somewhere here, but in case it hasn't... I have a Fluke 6500-2 and had trouble testing SPD extension leads as you cannot drop the voltage to 250V using the IEC lead test button. I found a way to set up an auto test sequence to include EB and 250V...
Hello all,
I am new to PAT testing and have a Fluke 6500-2. I am having an issue whereby I cannot seem to drop the voltage down to 250V when testing a surge protected extension lead. I have read in a couple of places that without a means of lowering it from 500V simply hit the IEC test button...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc