I have a Cubigel GD30fc compressor fridge which is a BD35 Danfoss with different connections on the control box, It only runs if I link out the thermostat, the compressor gets hot but there is no cooling, the fault code LED just shows a continuous light.
I'm out of ideas. Is there any check I...
I'm repairing a 110 v 3 kva site transformer that the base cracked and all the sand leaked out, can anyone tell me exactly what the sand is there for and can I replace it with any dry sand or even just leave it out?
The transformer won't be used on site but at home.
I live off grid, have 500w of solar panels laid horizontal on my boats roof, naturally its not producing anything this time of year, my backup 5 kw Diesel generator is waiting for repair, i use a 30 amp digital charger with it but all I have working is a small 400 w petrol generator ( with AVR )...
I have acquired an old British Thompson Houston 1/3 HP BKS 2410 single phase motor on a pillar drill, it needs new bearings before I can test run it, my question is can I use a multi meter to check the windings and find out if its a go-er at this stage and worth restoring ?
If so how ?
I was given a couple of 3 kva site transformers, both have broken bases and all the sand has leaked out, epoxying a new base on is no problem, and I will only be using them myself at home, but what kind of sand should I refill them with ?
I have a 240v freezer that is rated at 75w I want to run from my 12 v battery bank ( solar ) can anyone tell me what size watts inverter I will need to handle the surge on starting it up, and running it ?
And do basic no frills fridge compressors require any particular sine wave to run ?
I've gone and bought rechargeable clippers now, I would be interested to know if the output voltage of cheapo Chinese inverters can be adjusted though.
I have a large 240v freezer running off a 12 v solar battery bank via an inverter, I would like to have a small backup inverter for the freezer that will cut in if the main one fails, and save all my food. Any one tell me how to do this please ?
Inverters..
1. 56hz - 198 v
2. 67hz - 201 v
3. 51hz - 203 v
Generator at 230 v - 1540 - 1600 hz
That solves the mystery then ?
I knew the geny was out of spec, but not all three inverters.
I live off grid with only solar and generator power, I've been using hair clippers for years but now I have 3 sets of Wahl mains clippers none of which will run properly in any of my 3 inverters, nor a ( non inverter ) Honda generator. The motors / solonoids in the clippers run weakly and can't...
Sorry don't know why the thread appeared twice.
What would be the correct battery to battery connections cable size ? I don't even pull 10 amps out of the bank, and the 500 w max output of the panels is never even remotely achieved.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc