Search results

  1. M

    EICR Code - Socket Radial - No CPC

    Erm where did I say it seems to be all circuits? I came on asking for assistance on finding a regulation. There's one for no CPC at lighting as I stated, I mean there's reg pointing to the use of extension leads due to lack of sockets as a C3. I thought there must be one for no CPC or...
  2. M

    EICR Code - Socket Radial - No CPC

    No, Just one of the Radial circuits on the DB. All other circuits have Earth Protection continuity
  3. M

    EICR Code - Socket Radial - No CPC

    There's a CPC but No Continuity to it. Seems to be to all circuits, well the ones I could find anyway as it was a Huge Manor house. Needs to be investigated further to locate the break. Otherwise worst case decommissioning or rewire the circuit. I'd say C2. Potentially Dangerous but needs...
  4. M

    EICR Code - Socket Radial - No CPC

    Hi guys Completed an EICR yesterday. One of the Sockets Radials had no CPC so R1+R2 plus Zs could not be not be completed. Does anyone know the Regulation supporting this Code 1/2? I can see 411.3.1.1 but this relates to Lighting. If anyone could assist Id appreciate it, I know its a fault but...
  5. M

    Countrywide Repairs Offering 350 EICR's IS a Scam. AVOID

    There under the name City Property Group now. They contacted me this week.
  6. M

    Countrywide Repairs Offering 350 EICR's IS a Scam. AVOID

    There under the name City Property Group now. They contacted me this week.
  7. M

    Flickering Lights Issue

    Hi Guys, just a quick update. I went back today and ensured all conductors were tight at the consumer unit, which i knew they already were. I had a quick look at the supply end but couldnt see an issue. Anyway I asked them to put the dryer on and the lights and sockets were affected. So I...
  8. M

    Flickering Lights Issue

    Yes the Lights are affected where high powered appliances are used. I did think myself that it must be from the Supply side as like you said multiple circuits are affected. Thanks for the assistance, Ill go tomorrow and check the connections and then call Western Power. Andy
  9. M

    Flickering Lights Issue

    Hi Guys Looking to see if anyone has had the same issues. I went to a tennanted property last year where the house lights were flickering and all circuits were playing up and tripping the Board protected by 1 very old RCD which was the cause of the issue. I changed the Board to a new RCBO...
  10. M

    Back Box In Hollow Wall Installation

    I think every socket i need to chase in will need filling then afterwards. Jeez what a nightmare this job will be
  11. M

    Back Box In Hollow Wall Installation

    Yeah that's exactly what it feels like clay tile, I think your spot on.
  12. M

    Back Box In Hollow Wall Installation

    Hi Guys, I've completed rewires with hollow walls before and was able to use a dry line Box. No chance of being able to use them this time. I've never seen walls like this though. Just wondering how people have installed back boxes in this circumstance? I've attached a pic I'm assuming...
  13. 20220801_165208.jpg

    20220801_165208.jpg

    • mackatoon
    • Media item
    • Comments: 0
    • Category: Electrical Videos
  14. 20220801_170514.jpg

    20220801_170514.jpg

    • mackatoon
    • Media item
    • Comments: 0
    • Category: Electrical Videos
  15. M

    UK Damage Costs assistance

    If anyone knows a decent well priced Thermal Camera then please let me know. Definitely may invest in one for the future although i would only use occasionally. I appreciate your comments guys. Thanks
  16. M

    UK Damage Costs assistance

    Cheers for the reply guys. I've taken your comments onboard and covered the plumbing repair cost
  17. M

    UK Damage Costs assistance

    Hi Guys Just after some advice as every day is a school day. So putting some power into a garage using SWA. Fuse board is in a little toilet downstairs so drilled through external wall in line with the consumer unit high up near the ceiling pretty much top corner, within building regs safe...
  18. M

    Live Earth Reverse

    Booked in to go back, finished the EICR at 3pm but was then faffing around trying to find a nuetral problem until 5pm. Neither socket either side of the break had an issue The break must be under the boards and running the tests today must have made the issue worse. Thanks for the assistance guys.
  19. M

    Live Earth Reverse

    Voltage testers show continuity, but I can't get an actual R1 result from my megger. Cpc continuity total fail
  20. M

    Live Earth Reverse

    If would make more sense if I was called out to a fault. However I haven't messed with the connections and the 3 sockets worked fine before apparently. Not sure if running the IR down each leg has caused an issue

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Gas Forum | Unofficial Gas Safe Register Forum
Workwear Shropshire
Top Bottom
Back